Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Put Cam Lock Screws into the pre-drilled holes of Top (A) Side Panel (B),(C) and tighten.
B
C
A
STEP 2
Attach Back Stretcher (G) to Side Panel (B) using Cam Lock.
Attach Rails (H) to Back Stretcher (G).
Slide Back Panels (I) and (J) to unit.
Attach Back Stretcher (G) to unit
using Cam Lock.
B
G
G
H
H
J
Cam Lock
Cam Lock Screw
I
I
