background image

TABLE OF CONTENTS

            

Specifications.......................................... page 1

            

Connection Diagram and Warranty......... page 2

            

Technical Support................................... page 2

            

Terminal Block Connections.................... page 2

            

Set-Up and Testing................................. page 3 & 4
Device Manager...................................... page 4
Trouble-Shooting..................................... page 5

          

Input & Relay Expansion Ports............... page 5
The ADC-4U11 User Interface.........

page 6

Auto Start-Up.......................................... page 6
The ADC-4U11 Data Logger................... page 7
Programming Examples......................... page 7
Voltage Reference for the analog inputs. page 8

            

Single Ended Analog Inputs.................... page 8

            

Analog Scaling and Differential Inputs.... page 9

       

Voltage Inputs and Sensor Interfacing.....page 10 & 11
Input Amplification and Conditioning..... page 11
Mounting..................................................page 11

SPECIFICATIONS

Power Supply.......................

Powered from USB port (5 volts DC)

Operating Temp. Range......

-40° C to +85° C

Serial Data Protocol.............   75 to 6,000,000 baud - auto detect (defaults to 115,200 baud)

Full duplex operation (data bits, parity, stop bits will auto detect)

Maximum Sampling Rate...... 100 samples per second or better

Analog Inputs.......................

4 single-ended inputs (11 bit resolution)
or 2 fully differential inputs (12 bit resolution)
(11 bit resolution will divide your measurement range into 2048 different increments)
(12 bit resolution will divide your measurement range into 4,096 different increments)

Expansion Capability............

expandable to control up to 144 relays/inputs (or combinations) using 
EX-8M, EXM-8, EXM-16 or EXM-32 Relay I/O Expansion Modules

Interface.............................. 

USB (also available in WiFi version (ADC4-11WIFI), Ethernet version 
(ADC4-11FENET) RS-232 version (ADC4-11RS232) or 
RS-485 version (ADC4-11RS485))

Software Compatibility.........

Windows XP, Vista, Windows Server, Windows 7, 8.1, Windows 10 and Windows 11

Weight.................................

.5 ounce

Size......................................

1.875 inches by 2.5 inches

Please see page 12 for additional specifications.

Page 1

  

TECHNICAL REFERENCE

ADC-4U11

ANALOG TO DIGITAL 

CONVERTER

Click for more info:     www.eeci.com/adc-4u11p.htm

(937) 349-6000
(800) 842-7714
(937) 349-6000
[email protected]

PHONE...................
ORDERS................
TECH SUPPORT...
E-mail.....................

www.eeci.com

Содержание ADC-4U11








Отзывы: