▪
digital operator
‑
push the stop button
3.
When the pump is set to off, the fan will operate until the pump cools down.
4.
Vent the pump through the inlet.
5.
Isolate the mains supply.
6.5 Restart the pump
If the pump is shut down automatically because of high pump power make sure the
pump rotates freely. Restart the pump. If the problem occurs again, contact us..
If the pump is shut down automatically because of an alarm condition, correct the alarm
condition before you start the pump. To restart the pump, refer to
23.
Page 28
A77010880_B - Operation
