6. Operation
6.1 Operation safety
WARNING: DAMAGED PARTS
Risk of electric shock. Do not operate the pump with any parts of the enclosures
removed or damaged as there can be a risk of an electric shock.
WARNING: OPERATIONAL SAFETY
Risk of injury or death. Do not expose any part of the human body to vacuum as this
can result in injury or death of people.
WARNING: PUMP TEMPERATURE
Risk of injury. Do not touch the pump inlet manifold or exhaust when the pump is in
operation as the pump inlet manifold and exhaust can get hot. Allow the pump to
cool down after the pump has stopped.
CAUTION: AUTOMATIC START
Risk of injury or damage to equipment. The system has an auto-run mode which, if
configured, is designed to automatically start the pump system once power is
applied.
CAUTION: CONDENSATE DEPOSITION
Risk of damage to equipment. Do not use the pump to pump particulates or
condensate. Deposition may occur in the pump. This can degrade the pump
performance and reduce the pump life.
CAUTION: MAXIMUM CONTINUOUS OPERATING PRESSURE
The pump can be controlled, stopped or put in standby mode only through the
interface used to start the pump. In auto
‑
run mode, the stop button on the user
interface panel will override the starting interface and stop the pump.
Note:
Do not exceed the maximum continuous operating pressure.
Note:
This is an industrial (Class A, Group 1) product as defined by EN55011 and EN61325. To
ensure compliance with European Electromagnetic Compatibility (EMC) requirements for
EMC emissions, please note that it is not intended for use in domestic buildings or in
properties directly connected to an electrical supply network which also supplies
Page 23
A77010880_B - Operation
