9. Storage
WARNING: HAZARDOUS SUBSTANCES
Do not drain oil from the pump. Install the blanking plates to seal the vacuum inlet
and outlet ports to prevent the possible oil leakage. Make sure that the pump is
correctly labelled. If in doubt, contact us.
1.
Shut down the pump. Refer to
on page 27.
2.
Disconnect the pump from the electrical supply.
3.
Install the protective covers over the inlet and outlet ports.
4.
Store the pump in a clean and dry condition until necessary for use.
5.
When necessary, prepare and install the pump. Refer to
on page 16.
Page 33
A77010880_B - Storage
