Zeroing the HRS
1. Place both ends of the HRS at the
same vertical level.
2. Tap the Clinical Actions icon on the
navigation bar.
3. Tap the Zero & Waveform button.
4. Tap the Zero button under Align &
Zero HRS.
NOTE: The HRS can be zeroed before being
placed on a patient.
Connecting the pump unit
to the patient monitor
1. Connect patient monitor adapter cable
to the pump unit and pressure cable
(4).
2. Connect pressure cable to the patient
monitor (5).
3. Move pressure output selection
to zero position (6).
4. Press the Zero button on
connected patient monitor (7).
5. Move the pressure output
selection to signal position (8).
4
5
6
7
8