Edwards & Co Ed & Co FA005, Инструкция по эксплуатации

Страница: 5 / 9

1. After installation and tightening, the buckle on the passenger seat
should be facing towards the lap belt guides as pictured in Figure
3.
IMPORTANT - always check that the seat is installed in a level
position as indicated by the seat level positioner. See the section
“Using the seat level indicator”.
IMPORTANT – if the seat does not feel secure, or does not exactly
match these instructions, go back and re-install it. Only once it is
properly secured is it ready to use.
Installing the seat to your car (cont.)
designed & printed in NZ
Where to install the car seat
IMPORTANT
- This car seat is only suitable for approved vehicles
fitted with a 3 point seat static or retractable seat belt.
IMPORTANT - Only install the seat in a forward-facing passenger
seat as indicated in Diagram 1 above. A forward-facing seat is one
that faces in the direction of the car’s movement. Do not install
into a rear-facing or side-facing passenger seat as pictured in
Diagram 2 above.
IMPORTANT
- Do not install the car seat in a passenger seat fitted
with airbags.
9
designed & printed in NZ
1. 2.
8