AVERY CAPSULE - USE + CARE GUIDE
6
Vehicle compatibility
This is a “Universal” child restraint. It is approved to Regulation No.
44/04 series of amendments for general use in vehicles and it will fit
most, but not all, vehicle seats.
A correct fit is likely if the vehicle manufacturer has declared in the
vehicle handbook that the vehicle is capable of accepting a “Universal”
child restraint for this age group.
This child restraint has been classified as “Universal” under more
stringent conditions than those which applied to earlier designs which do
not carry this notice.
This child restraint is
ONLY SUITABLE
for use in vehicles fitted with
a 3-point static or retractable seat belt that is approved to UN/ECE
regulation No. 16 or other equivalent standards.
If in doubt, contact the child restraint manufacturer or the retailer.
Base Unit compatibility
This child restraint is only compatible with Edwards & Co base models
PA0100 and PA0101.
Correct use of the child restraint
NEVER
use this child restraint without installing it securely into your
vehicle.
NEVER
alter or modify the child restraint in any way. This can affect its
performance in the event of a collision.
The cover and fabrics of the child restraint are integral to its
performance in the event of a collision.
NEVER
remove or replace the
fabrics of the child restraint unless this has been approved by Edwards &
Co.
DISCARD
this child restraint if it is involved in a serious collision
EVEN
if
no damage is visible.
