3
Quick start procedure:
PC or Mac Computer
Materials needed:
900-212 Sound Sensor
900-213 USB Module
USB to mini USB cable (included with the 900-
213 module)
Your sound sensor needs to be connected to a 900-213
module. The 900-213 module then connects to a
computer via a USB to mini-USB cable. Please note
that you cannot plug the sound sensor directly into the
computer.
Resident PC software and browser based application
can be downloaded for free at
as well as a full software user guide.
Note:
Make sure not to download and install both
types of software they will conflict on the computer.
Procedure:
1.
Install the Edu-Logger software
2.
Connect the 900-213 module to the PC or Mac
3.
Connect the sound sensor to the 900-213 module
(they directly plug together). Please note there is
no calibration required for this sensor.
4.
Open the Edu-Logger software.
5.
Once a sound sensor logo appears on the left side
of the screen the probe has been automatically
identified and you can begin experimentation.
6.
If the sound sensor is not automatically identified
then click the “Search for sensors” icon to find
the sensor.
7.
Click the “On-line experiment” button; this will
open a graph below.
