EDT Eurodima Braxx WB12T, Руководство пользователя

Страница: 12 / 24

WB12T
12
10 O
PERATION
Have you read and understood the safety instructions? You must not operate the
system before.
Mount the safety equipment correctly.
Consider the personal safety measures.
11 M
OUNTING THE CUTTING TOOLS
The wires may only be mounted and installed by trained personnel.
Only wires with a diameter of max. 12 mm, that fit onto the rollers, may be used.
When mounting the wire connections, the indicatiosn of the tool manufacturer have to
be considered. The turning of the diamond wire has to be done accordingly.
When using wire fastening sleeves, a new sleeve has to be installed after every cut.
Connecting wire parts with different diameters and the use of wires with loose wire
pearls or with broken carrier wire are prohibited!
Prior to every mounting, a visual examination of the wires must be done to find any
faulty points.
The connectors have to be checked for operational reliability.
Special attention has to be laid on the wire seating solidly on the rollers, and the
swivel roller being attuned to the alignment and then fixed. Only this ensures that the
wire can not skip off the rollers when the unit starts.
With these measures, an optimal function of the wire saw system WB12T can be ensured.
Non-observance risks damages at the wire saw system or the wire.
When a
new wire saw unit is put into operation, a 10 min test run at full load should be
done, due to the possibility of transport damages. Only after this test, the unit may be put into
operation.
12 F
UNCTIONAL DESCRIPTION
With the wb12, separating cuts in concrete, reinforced concrete, masonry, natural stone, big
metal parts etc. can be conducted. All cuts, whether horizontal, vertical, floor, ceiling, mitre,
diagonal or flush cuts can be done with lowest mounting and operating efforts, with the aid of
suitable wire guiding systems.
The electro pneumatic drive allows the low system weight, low power supply values, highest
electric efficiency, low-noise and smooth running as well as low tool wear. Furthermore, the
wire saw system features highest safety in operation for the personnel due to its
compactness and the protective cover of the whole wire running level within the unit.
In order to further reduce the risk of accidents, the wire is guided through hollow axles, thus,
wire whipping in case of wire crack is not possible anymore.