15958 ARMINTA ST. VAN NUYS, CA 91406-1896
PHONE: (818) 989-2324 FAX (sales): 818-997-0895
Email: [email protected] Internet: www.edsyn.com
© Copyright EDSYN,Inc.1998
REPLACING TIPS
LN230
SH230-1
CAUTION:
Over- lling can cause t hermal shock to the tip
or heating element during tip cleaning.
RS243
RS199
• Replace RS199 Cleaning Sponge
1. Fill water only up to the top of the
RS243
Leveling Pad.
2. Depress
RS199
to moisten it completely.
• Replace SC581 Solder Collector
1. Hold the Housing rm and turn Cap counter-clockwise
and pull it away from the Housing.
2. Remove used
SC581
and replace with a new one.
3. Reassemble Pod with TOP of the Cap in proper position.
MAINTENANCE
SC581
SR043
Front Housing
SR042
Thermal Housing
CAUTION
1. Tool must be cool when changing tips.
2. Do not twist or wiggle the tip.
AFTER TIP IS INSTALLED, TIGHTEN COLLAR PROPERLY.
Loosen RCS71 Collar by turning coun-
ter-clockwise and pull the Tip straight
out.
Part No. & Description
a
b
LT374
Standard Probe
.03 (0.8 mm)
.48 (12.2 mm)
LT375
Standard Spade
.06 (1.5 mm)
.48 (12.2 mm)
LT376-7
SMD Channel
.12 (3.0 mm)
.48 (12.2 mn)
LT392
Extra-Long Needle
.02 (0.5 mm)
1.13 (28.8 mm)
LT394
Extra-Long Spade
.07 (2.0 mm)
.93 (23.6 mm)
LT399
Large Face
.17 (4.3 mm)
.49 (12.4 mm)
LT444
SMD Mid-Length Fine Spade
.04 (1.0 mm)
.78 (19.8 mm)
LT446
SMD Probe
.03 (0.8 mm)
.48 (12.2 mm)
LT382
Long Cone
.02 (0.5 mm)
.62 (15.6 mm)
LT395
Mid-Length Stubby Spade
.09 (2.3 mm)
.74 (18.8 mm)
LT431
Mid-Length Spade
.07 (1.8 mm)
.74 (18.8 mm)
LT439
SMD Thin Probe
.03 (0.8 mm)
.50 (12.7 mm)
LT439-1
Same as LT439, Angled
LT445
SMD Angle Face
.03 (0.8 mm)
.48 (12.2 mm)
General Purpose Soldering Tips
Iron Plated for long life•Nickel and Chrome Plated for optimum heat transfer.
EDSYN has over a 100 varieties of standard and custom-made Tips. CONTACT EDSYN FOR MORE SELECTIONS.
LTC71
RCS71
FORM.922
Rev C
