Assembly Instructions for HR153060
Assembly Instructions for HR153060
Assembly Instructions for HR153060
Start by adding a woodboard shelf to the level previously
built, then continue working by adding the second level
using two (2) beams and two (2) braces in the post tabs
of your desired location. Again place the holes of the
beams and braces over the post tabs with the shelf
ledge facing up and tap lightly to seat the tabs.
IMPORTANT NOTE : Make sure all beam / brace holes are fully seated into the tabs of the post.
IMPORTANT NOTE : Make sure all beam / brace holes are fully seated into the tabs of the post.
IMPORTANT NOTE : Make sure all beam / brace holes are fully seated into the tabs of the post.
Step
1
Step
2
Step
3
Step
4
Figure A
Brace
Post
Woodboard Shelf
Add a woodboard shelf to the previously built level, then
assemble the top post to the bottom post by using four
(4) of the post couplers. Place the couplers into the top of
the bottom post, and the bottom of the top post and tap
down to properly seat (see figure D). Continue by adding
the third level of beams and braces just above the post
couplers. Again tap lightly to seat the tabs.
Add a woodboard shelf to the previously built level, then
continue by adding the final level of beams and braces to
the unit. Tap lightly to properly seat the tabs and add the
final woodboard shelf to the top of the unit.
Figure B
Note:
Post are
directional.
The tab must
point up.
Note:
Post are
directional.
The tab must
point up.
Assemble two (2) post with one (1) brace (see figure A).
Skipping one (1) tab from the bottom of the post, place the
holes of the brace over the tab of the post with the shelf
ledge facing up (see figure B). Tap lightly to seat tabs. Re-
peat with two (2) post and one (1) brace. Assemble the two
(2) post end units with two (2) beams (see figure C). Skip
one (1) tab from the bottom of post, tap lightly to seat beams.
Shelf Ledge
Tap Lightly
Post Tabs Point Up
Figure C
Beam
Top Post
Figure D
Post Coupler
Bottom Post
Woodboard Shelf