Edsal 889201, Руководство пользователя, Страница: 2 / 12

Parts List
A
Rubber Mallet
Gloves
Preparation
E
Narrow end
of slots face
down
FIG. 1
Parts List: Model UR361872PB5G/ Item 889201
36”W x 18”D x 72” (91cm x 45cm x 182cm)
Description Qty Part#
A. Post 8 URPS36-GRY
B. Brace 10 URBR18-GRY
C. Beam 10 URBM36-GRY
D. Particleboard Deck 5 RPB31836
E. Post Reinforcement 4 CPIN-GRY
F. Post Cap 8 RL-PC-B1
Parts List: Model UR482472PB5G/ Item 889202
48”W x 24”D x 72”H (121cm x 60cm x 182cm)
Description Qty Part#
A. Post 8 URPS36-GRY
B. Brace 10 URBR24-GRY
C. Beam 10 URBM48-GRY
D. Particleboard Deck 5 RPB32448
E. Post Reinforcement 4 CPIN-GRY
F. Post Cap 8 RL-PC-B1
ALTERNATE ASSEMBLY
This unit can also be assembled as two separate 36 in. high units (see FIG. 4). One unit
will have three shelves and the other will have two shelves. If choosing this option, follow
assembly steps 2, 3, 4, 5 and 9 until all shelf levels are completed for both units. Note: Use
all 8 of Post Caps (F) in final step 9. Post Reinforcements (E) are not used for this setup.
Alternate Assembly:
Two 36 in. high units.
D
E
F
→
A
B & C
Rivets
→
Assembly of this unit is done by fitting the two rivets of the braces (B) and beams (C) into the keyhole slots of the post (A). The narrow end
of the keyhole slots from the post must face down (see FIG.1). Braces and beams must be installed with the ledge facing up on the inside.
Assemble the unit from bottom to top. It is recommended that the bottom shelf assembly be installed into the second keyhole slots at the
bottom of the posts. The middle shelves should be evenly spaced. A rubber mallet should be used to tap down on the top of the braces and
beams to properly seat the rivets down into the narrow end of the keyhole slots (see FIG. 2 and FIG. 3).
Use a rubber mallet
to lightly tap down
on Brace / Beam to
seat the rivets down
into the narrow end
of the post slots.
✓
B
C
FIG. 2 FIG. 3
FIG. 4
Rivets properly
seated into the
narrow end of
post slots.
HELPFUL TOOLS/ITEMS FOR ASSEMBLY (NOT INCLUDED):