Caution
The speaker is equipped with a built-in lithium battery. Do not disassemble or replace the
battery. Do not leave the speaker in high temperatures or dispose of in fire.
Note
a. This
Bluetooth
®
speaker can only connect to one Bluetooth
®
device at a time; if it is to
be connected to another device, power off the speaker and repeat the pairing steps
below.
b. This
Bluetooth
®
speaker can only connect to one Bluetooth
®
device at a time. If you
do not know if the speaker is connected to another device, first disconnect and then
connect to the desired device. The maximum distance between the 2 Bluetooth
®
devices is 10 m.
c. If there is another Bluetooth
®
device in operation nearby, interference may occur. In
case of interferences move the Bluetooth
®
device away.
Bluetooth connection
Power the speaker on, the LED lights up and you hear the voice prompt “Bluetooth
®
mode”.
Turn on the Bluetooth
®
function in your mobile device to search the model ednet
33050 in the device list and click to connect the Bluetooth
®
device with the speaker.
When hearing the door gong, pairing is completed.
Press the
button once to play/pause music and press the
button to skip to the
next song; press and hold this button to increase the volume. Press the
button to
skip to the previous song; press and hold this button to decrease the volume.
Audio connection (AUX in)
Power the speaker on and connect an Aux-in cable to Audio In of the speaker and
Audio Out of your mobile device or PC/notebook, etc.
Press the
button to mute the sound; press and hold the
button to increase the
volume and the
button to decrease the volume.
FM mode
Connect the micro USB cable to be used as antenna.
Power the speaker on and press and hold the M button to switch to FM mode; you
hear the voice prompt “FM mode”.
Press the
button once to play/pause the radio channel. Press the
button to
select the next channel; press the
button to select the previous channel. Press and
hold the
button to increase the volume and the
button to decrease the volume.
Mode switch
a. Power the Bluetooth
®
speaker on. Default mode is Bluetooth
®
connection.
b. Press and hold the M button to cycle through the 3 modes: Bluetooth
®
/FM radio/AUX-
In.
