Edmund Optics Autocollimator, Пошаговая инструкция, Страница: 8 / 23

PROPRIETARY - Property of Edmund Optics, Inc. | 2012 Copyright© Edmund Optics, Inc.
2. Using M3 SHCS,
attach the 25mm Cage
Mounting Plate (#85-
632) onto the face of
the Sphere (#85-624)
opposite the 43mm
port.
3. Carefully insert the
beamsplitter assembly
(mount first) from Step
1 into the sphere
through the 43mm port.
Slide the base of the
beamsplitter mount into
the 25mm aperture of
the cage plate from
step 2. Use M3 set
screws to lock the
beamsplitter in place
(alignment will be done
later).
BEAMSPLITTER ASSEMBLY
8
4. Attach the Square
Interface Plate (#85-
737) onto the 43mm
port with M3 SHCS.
5. Attach 2 of the 30mm
Cage Mounting Plates
(#85-630) onto
opposite faces of the
sphere. Be sure the
M6 tapped holes are
oriented down toward
the 25mm plate.