background image

 Ref. 267455  

BOARD LIFTER

INSTRUCTION AND SECURITY 

MANUAL

• Respect the safety instructions in order to avoid injuries or damages on surrounding elements. 
• Follow the operating instructions to avoid damaging the tool.

READ THIS MANUAL CAREFULLY BEFORE THE FIRST USE

HANDLE

STEERING WHEEL 

POWER DRILL 

SUPPORT BASE 

MAIN BRAKE LEVER 

HANDLE TO ANGLE 

THE TOP RACK 

WOODEN PLATFORM

Reference : 267455

Maximum loading weight : 80 kg (175 lbs)

Maximum board dimensions : 1,20 x 6.00 m (3,94 x 19,69 Ft)

Minimum board dimensions : 0.15 x 0.60 m (0.49 x 1.97 Ft)

Maximum height with extension part : 4,50 m (14,76 Ft)

Maximum height without extension part : 3,50 m (11,48 Ft)

Minimum height : 161 cm (5,28 Ft)

Maximum vertical lifting height with 2,50 m (8,2 Ft) height board :5,75 m (18,86 Ft)

Board loading height : 80 cm (2,62 Ft) without extension

Minimum width in moving/storage position : 63 cm (24

3/4

”)

Total gross weight: 68.5 kg (151 lbs)

SPARE PARTS 

WEAR PARTS

SPECIFICATIONS

- Ref 526732 - Hex bit for using with power drill

- Ref 526761 - Steering wheel central screw 

- Ref 526735 - Top rack retractable stopper

- Ref 526756 - Steering wheel

- Ref 526740 - Steering wheel handle

- Ref 526746 - Main brake lever

- Ref 526747- Removable pin

- Ref 526741 - Balance bar with wheels

- Ref 526742 - Power drill support base

- Ref 526737 - Middle foot

- Ref 526744 - Side foot with brake

- Ref 526743 - Side foot without brake

- Ref 526763 - Top rack

- Ref 526764 - Right arm

- Ref 526765 - Left arm

- Ref 526766 - T-arm tube

- Ref 526757 - Extension tube

- Ref 526758 - Internal tube

- Ref 526736 - Wooden platform

- Ref 526754 - 43 mm (1

3/4’’

) screw + nut

- Ref 526753 - 58 mm (2

1/4’’

) screw + nut

- Ref 526751 - 68 mm (2

5/8’’

) screw + nut

- Ref 526750 - 78 mm (3

1/8’’

) screw + nut

- Ref 526755 - Nut

Ref 526730 - Brake lining

Ref 526731 - Metallic cable

Ref 526733 - Wheel with brake

Ref 526734 - Wheel without brake

SAFETY BRAKE

LEVER

REMOVABLE

PIN

CLAMPING

SCREW

Содержание 267455













Отзывы: