REF.
33945
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
WARRANTY
The warranty period is 24 months from the date of purchase and covers all manufacturers failures in material and
quality. This warranty applies only if you have followed the instructions, and is void if the unit has been forced or has
been used improperly and inadequate, or if it has been repaired by an unauthorized person.
BILL IS THE PRODUCT WARRANTY
- Place the fan on a flat and dry surface.
- Before connecting the device to the network, make sure that the switch is in the "0" position.
- Plug the power cord into the 220 / 240V - 50Hz AC outlet.
- Through the 3-speed system you can start the fan, this system is designed to give you maximum flexibility.
You can also activate the oscillation function by means of the oscillation switch.
POSITION 0: OFF position
POSITION 1: first speed
POSITION 2: second speed
POSITION 3: third speed
OSCILLATION: oscillation button / fix direction (num.9)
- If you do not use the fan for a long time, unplug the cord from the electrical outlet.
- Never try to disassemble the device from the engine.
- If you notice any anomaly (such as unusual fan noise), turn off the device and unplug it immediately.
- Make sure that no objects or liquids enter the inside of the fan through the openings in your box.
- The fan should only be used in dry environments.
- Protect the device from dust, moisture, sunlight and direct heat.
CLEANING AND MAINTENANCE
Make sure that the appliance is switched off before cleaning it.
- Clean with a soft damp cloth, without detergent, aggressive liquids or solvents.
- Do not immerse the fan in water or any other liquid.
- If the fan is not going to be used for a long period of time, clean and protect it and keep it in a dry place.
FEATURES
- Power: 45W
- Speeds: 3 levels
- Fixed or Oscillating Position
- Security grille
- Diameter of the blades: 40cm
- Heights: min.100 - max.120cm
PARTS OF THE FAN
1. Grid clamping ring
2. Front of the grid
3. Fixer of the propeller
4. Helix
5. Grid bra
6. Back of the grid
7. Motor
8. Control panel
9. Rotation regulator
10. Fixing screw
11. Telescopic top tube (chromed)
12. Fixing ring
13. Telescopic bottom tube (white)
14. Cover
15. Base
ASSEMBLY INSTRUCTIONS FOR THE BASE AND THE BODY
1. Remove all packaging carefully, avoid scratching the plastic covers with scissors or knives.
2. Mount the base.
3. Fix the base of the telescopic bottom tube with the screws.
4. Stretch the upper telescopic tube inside the tube and fix it with the ring.
5. Put the base of the rear cover of the motor and then use a nut to hold it.
6. Place the propeller on the front axle of the engine and then use the nut to secure it.
7. To finish, cover with the front protection using the clamping ring and close it with the screw.
8. Next, insert the completed fan body into the inner tube. And finally, use the nut to fix the body fastener
with the ventialdor.
OPERATION OF THE FAN
10