- 5 -
PRODUCT IDENTIFICATION
1. Control panel
2. Air outlet
3. Handle
4.
Front panel
5. Back panel
6. Water out hole
7. Water tank
CONTROL PANEL DESCRIPTION
- 6 -
OPERATION INSTRUCTION
Starting the unit
1. Firstly, turn the humidity control switch to the “OFF” position.
2. Plug in the dehumidifier.
3. Turn on the humidity control switch (to right side) and turn the same
switch to the desired humidity level (ex: 65% in general).
Turning off the unit
1. Turn the humidity control switch to the left side to the “OFF” position
and the power supply is cut off and the unit stops in operation.
2. If the dehumidifier is not in use for a long time, please disconnect the
power cord plug from the outlet.
PRECAUTIONS
1. The dehumidifier shall not operate if the humidity setting is higher than
the ambient humidity.
2. Drain the water in the water storage tank when the water in the tank is
full and the water level indicator light illuminates. And then install the
empty water tank back to its position, so the unit can continue its
operation.
5. 3. When the unit stops, you have to wait for 3 minutes before you can
restart the unit to protect the compressor from damage.
6. The operational temperature range for this unit is 5-35oC.
7. If the dehumidifier does not start (the operational light does not
illuminate) or the dehumidifier makes intermediate stop on unknown
reasons, please check the plug and power supply for poor connection. If
the plug and power supply are in normal condition, wait for 10 minutes
and restart the unit (because take about 10 minutes to reposition). If the
