Page 28
Timer
Up to 8 time-based events can be programmed in this menu. In addition to programming recordings of
Radio or TV channels, it is also possible to display events, such as a nice birthday or anniversary
greeting at a certain time or specify to which channel to be woken up. Information on recordings can
also be found in section EDIVISION.
Functions and settings in the menu:
Timer number: Calling up the timer menu automatically switches to the next (available) programmable
timer. Use the left/right arrow buttons or OK button and the up/down arrow buttons to switch between
(programmed) timers.
Timer mode:
Set the recording mode here. Choose whether the recording is carried out
once, daily, weekly or monthly.
Timer service:
Specify a service here. Select the item 'Recording TV Channel' or 'Recording
Radio Channel' for recordings. If wanting to be woken with a specific
channel, select the 'TC Channel' or 'Radio Channel' here. Select the
'Message' input if wanting to display a message on the screen at a certain
time. Wake-up message: This item only appears when coming across the
'Message' setting in the previous item. This allows to choose between
'Birthday', Anniversary' or 'General'.
Station:
This item does NOT appears when coming across the 'Message' setting in
the 'Timer Service' item. Otherwise, set the channel here to be recorded or to
which to be woken up.
Date:
Set the (start) date of the recording here.
Start time:
Set the start time here.
Duration:
This item is only changeable if the 'Recording TV Channel' value or
'Recording Radio Channel' value was set at the 'Timer Service' item. Then
set the duration of the recording here (recording length).
Standby at the end:
This item is only changeable if the 'Recording TV Channel' value or
'Recording Radio Channel' value was set at the 'Timer Service' item. It is
then possible to determine whether the receiver should switch into standby
mode after recording.
Exit the timer menu with the
EXIT button
. After making changes and wanting to keep them, confirm
with 'Yes' in the appearing dialogue window.
Note:
An error message appears under certain circumstances. As a rule, an incorrect start time or start
date was given. Check the information!
Note:
A recording is only possible if a compatible USB memory device is connected to the receiver.
Note:
A list of all programmed Timers can be found as follows: Press the EDIVISION button in the TV
mode and then the yellow button, and then select 'Timer List' in the appearing menu window.
Содержание Progressiv HDC NANO
Страница 1: ...progressiv HDc nano Full HD Sat Receiver User s Guide...
Страница 22: ...Page 22 TV list no 2 TV list no 3 TV list no 4 SmartCard information...
Страница 39: ...www edision gr...