Version of November 22th, 2021
19
Note:
The speed of the update via USB may depend on the organization of the data in the USB memory. It
is recommended to pre-format the USB memory via the “HDD formatting” item in the “USB”/”Memory device
information” menu (start formatting with the yellow key) and then save the Software (.bin) file to it.
Menu functions and settings:
File Path:
If the receiver finds files for updating on the USB memory device, it displays them. You can use
the arrows and the OK button to select the file that will be updated. If no file is found, ‘No File’ will appear on
the screen.
Section:
With the arrows and the OK button here you can set which parts of the software you want to be up-
dated.
Start:
Once you have selected the software file and the update mode, navigate with the up/down arrows to
the “Start” point. Press the OK button to start the update process.
Caution:
The Software upgrade starts immediately with the OK button pressed and may not be interrupted.
Exit the “USB/HDD Update” menu by pressing the
EXIT key
.
HTTP (Online) Update:
Online Update Mode: Specify at
this point which area of the soft-
ware you want to be updated via
HTTP (Online).
You can choose between Soft-
ware & Loader or Software.
Timer setting
In this menu you can make up to
8 time-supported entries (Timer).
You will also find a lot of informa-
tion in the EDIVISION section.
Menu functions and settings:
Timer number:
Opening the
“Timer” menu automatically
switches to the next one (avail-
able) adjustable timer. You can
move between the (set) timers
with the left/right arrows or the
OK key and the up/down arrows.
Selection:
Specify how the recording works here. You can choose if the registration will be done once,
or if it will be done on a daily basis, per week or per month.
Event:
Specify the type of recording program here (TV / radio channel).
Channel:
Select the channel here.
Start Date:
Select the (start) date of the registration here.
Start Time:
Select here the start time of the recording.
Duration:
Here you specify the recording duration (recording duration).
Waiting Stand by after
.
REC:
Here you can specify whether the receiver will switch to Standby mode after the end
of the recording.
