Amplifier Control Panel
Rear View showing mounting brackets
INSTALLATION GUIDE
1. Fix the wall mounting screws into a suitable wall plug in the wall in a position so that
the speaker can be hung on this screw using the “keyhole” wall mounts. Hang the
speaker unit on these fixings and mark a hole position on the wall for the position of
the security bracket at the base of the speaker unit.
2. Drill and install a suitable wall plug for the security bracket.
3. Hang the speakers using the “Keyhole” wall mount and secure the speaker to the
wall with screws into the wall plug position under the speaker.
4. Connect the PC Audio cables with 3.5 mm mini jack connectors into the side of the
speaker unit and into the audio sources
5. Check that both the on/off switch and the Volume control on the speaker are switched
off. Plug the power cable to the mains supply and switch the supply on.
6. Follow the Operating Instructions below