manualshive.com logo in svg

Edirol V-440HD, Руководство пользователя, Страница: 37 / 92

Поделиться
Скачать
Edirol V-440HD Скачать руководство пользователя страница 37

37

SD Section Operations

You can switch and compose SD video in the SD section.

You can switch the SD video input using the V-440HD’s video fader 
(SD) along with the A-BUS channel buttons (SD) and B-BUS channel 
buttons (SD). 

Switching Buses with the Video Fader (SD)

When the video fader (SD) is tilted towards the A-BUS, the video on 
the A-BUS is output. Similarly, when the video fader (SD) is tilted 
towards the B-BUS, the video on the B-BUS is output.

*

For instructions on selecting the video on the A-BUS and B-BUS, 
refer to “Selecting the Bus Input” (p. 38).

To confirm (preview) the video in the bus opposite that to 
which the video fader (SD) is tilted, connect a television monitor 
to the “SD PREVIEW OUT connector” (p. 19).

*

In addition to the preview video, you can also output from the SD 
PREVIEW OUT connector the same video that is output from SD 
PGM OUT. Set this from the menu by selecting “13. SD Preview Out 
Select” under “13. System.”

Switching Buses with the AUTO Button (SD)

The A-BUS and B-BUS switch automatically when the AUTO Button 
(SD) is pressed. The time used for switching between the A-BUS and 
C-BUS is set by rotating the TIME knob (SD). The time set with the 
TIME knob (SD) is indicated in the TRANSITION TIME display 
(SD). The time can be set to any value from 0.0 to 4.0 sec.

Operation when the AUTO Button Is Pressed

If the AUTO button is pressed a second time while the video is 
switching, the output image will be switched as described below.

*

You can set how operations are performed when the AUTO button is 
pressed. For more details, refer to “AUTO Button Operation Mode” 
on this page.

Switching in the SD Section

B-BUS Channel Button

(SD)

A-BUS Channel Button

(SD)

Video Fader

(SD)

TIME Knob (SD)

AUTO Button (SD)

Time elapsed
after pressing
button 

When AUTO button
is pressed

50%

1.0 sec

2.0 sec

Finish

Response When AUTO Button Is Pressed a Number of Times

(Figures shows operation with TRANSITION TIME set to 2.0 seconds)

When AUTO button
is pressed within
1.0 second

When AUTO button
is pressed more 
than 1.0 second later

Fade amount

Fade amount

AUTO Button Operation Mode

You can switch the operational mode to be used when you 
press the AUTO button for “17. Autotake Sw Motion” under 
“13. System” in the menu (p. 24).

*

 When “PGM-PST Mode” is selected in “Changing the 
Switching Method” (p. 39), then even if Change is selected, 
operation will in fact be the same as if Continue were selected.

Mode Name

When Pressed 
During Operation

Pressed During Opera-
tion and Pressed Again

Change (Initial 
setting)

Stops

Returns in response to 
level

Continue

Stops

Continues in same direc-
tion as that before stop-
ping

Jump

Forces execution 
of the operation

---

Cancel

Cancels the oper-
ation and returns 
you to the previ-
ous step

---

Содержание V-440HD





























































































Отзывы:

Нет отзывов