Edirol V-4, Руководство пользователя

Страница: 36 / 112

36
Applying the Multi or Mirror effects
Applying the Mirror effect
Here’s how the image that is input to channel B can be divided and inverted. The result is as though
a mirror were placed in the center of the screen. The image can be inverted vertically, horizontally,
or both vertically and horizontally.
1.
Set the memory dial (MEMORY) to 1.
To restore the factory-set state, turn the dial all the way to the left to select the 1 position.
2.
Play back the image to which you want to apply the effect.
Play back the image to which you want to apply the mirror effect, and input it to the V-4.
3.
Select the input for channel B.
Input the image being played back into channel B. Use the channel B input select buttons to make
your choice.
4.
Move the video fader to channel B.
To output the image of channel B, move the video fader to channel B.
5.
Press the MIRROR button.
Press the channel B “MIRROR” button. This is the top effect button on the channel B side. With the
factory settings, the image will be inverted in the XX direction.
6.
Turn the control dial.
Turn the control dial. The mirror effect parameters will be adjusted, changing the number of parts
into which the screen is divided. The result is as though a greater number of mirrors were placed
against the screen.
7.
Turn the effect off
Press the button again to turn the effect off.
Some effects cannot be used simultaneously.
If you want to change the direction in which the image is inverted, you will need to edit the
parameter settings. For details on making this change, refer to p. 75 or later.
V-4_e.book 36 ページ ２００７年１０月１７日 水曜日 午後７時１５分