7
Español
Italiano
Français
Deutsch
English
Connections
Attaching the Rubber Feet
(Included)
Precautions Concerning
Connections and Initial Use
921
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on
all devices before making any connections.
926a modify
• Using a connection cable that contains a resistor can cause the
sound level to be low. Use a connection cable that does not
contain a resistor.
941
• Once the connections have been properly completed, be sure to
use the steps described below to turn on the STANDBY Switch.
Turning on STANDBY in the wrong order risks malfunction
and/or damage to speakers and other devices (reverse the
procedure when turning off the STANDBY Switch).
< Connected devices
→
MA-7A>
942
• This unit is equipped with a circuitry protection feature. A few
moments are required after the STANDBY Switch is turned on
before the unit is ready for normal operation.
945
• If you need to turn off the power completely, first turn off the
STANDBY Switch, then unplug the power cord from the power
outlet. Refer to
Power Supply
Connection Example
OUTPUT
(TO LEFT)
INPUT
(FROM RIGHT)
Sound Module, CD Player, MD Player, etc. (LINE OUT)
Rear Panel
MA-7A_egfis.fm 7 ページ ２００５年１月２５日 火曜日 午後２時２８分
