Edin Univox CLS-1, Руководство по установке, Страница: 6 / 12

6
Installation guide for CTC-120
with microphone for glass or wall
Figure 1
Installation and commissioning
1. Choose a suitable place for the loop driver. Consider that the loop pad, the microphone
and the loop driver’s power supply will be connected to the driver. If needed, attach the
wall holder facing upwards on the selected spot.
2. Choose a suitable location for the microphone. It can be placed on a wall or on glass.
When choosing a place for the microphone, consider that the staff shall be able to
stand or sit and talk in a normal, relaxed way with the listener. An example of how the
system can be laid out, see fig. 1. Place the microphone cable under the desk in such a
way that it will reach to where the loop driver/wall holder is mounted. The microphone
cable is 1.8 meters.
3. Mount the loop pad under the reception desk. The loop pad should be attached in the
angle between the front and the upper part of the reception desk as shown in fig.1 and
2. This will ensure a constant field distribution with the right direction and also allow
hearing aid users to tilt their head forwards, for example when writing. When mounting
the pad (be careful not to damage the loop cables inside the pad), place the loop pad
cable in such a way that it will reach the loop driver/wall holder. The loop pad cable is
10 meters.
Microphone
Loop pad
Power supply
connected to mains
Wall holder and
loop driver