5
Operating Instructions
Language options
• To set language playback, put AT-100 into compatible charger (ATC100/ATC100U) and
press PLAY/PAUSE (6) until the POWER LED (7) indicates green
• 32 language folders are available, with code numbers from 951 to 982
• With the unit in standby mode, enter desired language folder code and press the
PLAY/PAUSE button (6) to implement. The indicator will flash twice and the change is
successful.
Using AT-100
• Hold STOP/POWER (8) until the POWER LED (7) indicates
• Press the number of the corresponding object in the exhibition, then press PLAY/PAUSE
(6) to start
• If no headphones are connected, the built-in speaker (1) will sound, connect
headphones (2) if desired
• Adjust the volume, 7 and 9 (4)
• Pause the track with PLAY/PAUSE (6), press PLAY/PAUSE again to resume listening
• Stop the track by tapping STOP/POWER (8)
• Use 0 (5) to skip to the next track
• Hold STOP/POWER (8) until the POWER LED (7) goes out to turn the device off
Battery and charging
• The POWER LED (7) indicates green at full battery, orange at low battery and flashing
red when charge is needed. AT-100 needs to be charged in a charging station. Do not
mix batteries