
17
Troubleshooting
IRR-1
The receiver has no power
• Make sure the receiver is fully charged. Verify that the 3.5mm plug is inserted properly
into the headphone jack and the ON LED is illuminated. Note: IRR-1 receiver is
equipped with a rechargeable, non-removable Li-Polymer battery. In case of battery
failure do not attempt to replace or repair it. Please contact your local distributor for
further instructions.
No audio or poor audio quality (distortion)
• Check the volume control setting. Make sure the receiver is kept in the line of sight and
range of the transmitter/emitter and that the 3.5mm plug is property inserted into the
headphone jack.
• Check the transmitter operation and make sure that the transmitter and receiver are
operating at the same channel/frequency. If Neck Loop is connected verify that the
Stereo channel transmission is selected.
• Check the Squelch setting – if enabled, the audio output will be muted whenever the
signal from the transmitter/emitter is off or the level is too low.
The Installation Guide is based on the information available at the time of printing and are
subject to change without notice.
Содержание 650300
Страница 19: ...19 Notes ...