background image

 

- 3 -

Chapter I: Product Information 

 

1-1 Introduction and safety information 

 

Thank you for purchasing this nMAX wireless network card! Excepting common wireless standards 802.11b/g, 
this wireless network card is also 802.11 Draft-N compatible - data transfer rate is 300Mbps, and that’s six 
times faster than 802.11g wireless network! 802.11 Draft-N also provides wider wireless coverage, so you don’t 
have to worry if your computer is far from your wireless access point. This wireless network card also supports 
MIMO (Multi-In, Multi-Out) technology, which uses two different radio channels to enhance data transfer rate 
and wireless coverage. 
 
With easy-to-install USB 2.0 interface - a very common expansion port of computers - plug this wireless 
network card into any empty USB port of your computer, just that simple! 
 

Other features of this router including: 

 

„

 

Complies with 802.11b, 802.11g, 802.11 Draft 2.0-N standards 

„

 

Provides high-efficiency antenna, expands the scope of your wireless network. 

„

 

Provides QoS function: control the bandwidth required for different applications. 

„

 

Supports major encryption methods like WEP, WPA, and WPA2 encryption. 

„

 

Supports USB 2.0 interface - you can get it installed on your computer in just few seconds! 

„

 

Provides wireless access control - prevent unauthorized network access to your network and 

computer. 

www.4GSource.net

Содержание nMAX



























































Отзывы: