Edimax LAN USB Adapter Скачать руководство пользователя

Страница: 52 / 58

- 51 -

3-2 Troubleshooting

If you encounter any problem when you’re using this wireless network card, don’t panic! Before you call your

dealer of purchase for help, please check this troubleshooting table, the solution of your problem could be very

simple, and you can solve the problem by yourself!

Scenario

Solution

I can’t find any wireless access

point / wireless device in ‘Site

Survey’ function.

1. Click ‘Rescan’ for few more times and see if you can find any

wireless access point or wireless device.

2. Please move closer to any known wireless access point.

3. ‘Ad hoc’ function must be enabled for the wireless device you

wish to establish a direct wireless link.

4. Please adjust the position of network card (you may have to

move your computer if you’re using a notebook computer) and

click ‘Rescan’ button for few more times. If you can find the

wireless access point or wireless device you want to connect by

doing this, try to move closer to the place where the wireless

access point or wireless device is located.

Nothing happens when I click

‘Launch config utilities’

1. Please make sure the wireless network card is inserted into your

computer’s USB port. If the Ralink configuration utility’s icon is

black, the network card is not detected by your computer.

2. Reboot the computer and try again.

3. Remove the card and insert it into another USB port.

4. Remove the driver and re-install.

5. Contact the dealer of purchase for help.

I can not establish connection

with a certain wireless access

point

1. Click ‘Connect’ for few more times.

2. If the SSID of access point you wish to connect is hidden (nothing

displayed in ‘SSID’ field in ‘Site Survey’ function), you have to

input correct SSID of the access point you wish to connect.

Please contact the owner of access point to ask for correct

SSID.

3. You have to input correct passphrase / security key to connect an

access point with encryption. Please contact the owner of

access point to ask for correct passphrase / security key.

4. The access point you wish to connect only allows network cards

with specific MAC address to establish connection. Please go to

‘About’ tab and write the value of ‘Phy_Addess’ down, then

present this value to the owner of access point so he / she can

Содержание LAN USB Adapter



























































Результаты поиска

Содержание LAN USB Adapter

Отзывы:

Похожие инструкции для LAN USB Adapter

Бренды по названию

Популярные бренды

Edimax LAN USB Adapter, Руководство пользователя

Результаты поиска

Содержание LAN USB Adapter

Отзывы:

Похожие инструкции для LAN USB Adapter

Бренды по названию

Популярные бренды