Edimax IC-3116W, Быстрое руководство по установке

Страница: 12 / 18

12
III-2. WPS (Wi-Fi Protected Setup)
The WPS button is a quick and easy method to establish a secure wireless
connection between your network camera and your wireless router/access
point.
1.
Press and hold the WPS button on your wireless router/access point for
the correct length of time to activate its WPS.
Please check the instructions for your
wireless router/access point for how long
you need to hold down its WPS button to
activate WPS.
2.
Within two minutes, press the WPS/Reset button on the network camera
for 2 – 5 seconds to activate WPS. The
green LAN LED will flash slowly to
indicate that WPS is active.
Take care not to hold the WPS/Reset
button too long and reset your network
camera (see
I-5. )
3.
The devices will establish a secure wireless
connection. The
green LAN LED will flash
quickly to indicate a successful WPS
connection.