Edimax GS-5424PLC, Руководство пользователя

Страница: 162 / 221

172
Item Description
ACL Name Display the ACL name to which an ACE is being added.
Sequence
Specify the sequence of the ACE. ACEs with higher sequence are
processed first (1 is the highest sequence). Only available on Add dialog.
Action
Select the action for a match.

Permit: Forward packets that meet the ACE criteria.

Deny: Drop packets that meet the ACE criteria.

Shutdown: Drop packets that meet the ACE criteria, and disable the
port from where the packets were received. Such ports can be
reactivated from the Port Settings page.
Protocol
Select the type of protocol for a match.

Any (IP): All IP protocols are acceptable.

Select from list: Select one of the following protocols from the
drop-down list.
ICMP/IPinIP/TCP/EGP/IGP/UDP/HMP/RDP/IPV6/IPV6:ROUT/IPV6:F
RAG/ RSVP/IPV6:ICMP/OSPF/PIM/L2TP

Protocol ID to match: Enter the protocol ID.
Source IP
Select the type for source IP address.

Any: All source addresses are acceptable.

User Defined: Only a source address or a range of source addresses
which users define are acceptable. Enter the source IP address
value and mask to which will be matched.
Destination IP
Select the type for destination IP address.

Any: All destination addresses are acceptable.

User Defined: Only a destination address or a range of destination
addresses which users define are acceptable. Enter the destination
IP address value and mask to which will be matched.
Source Port
Select the type of protocol for a match. Only available when protocol is
TCP or UDP.

Any: All source ports are acceptable.

Single: Enter a single TCP/UDP source port to which packets are
matched.

Range: Select a range of TCP/UDP source ports to which the packet
is matched. There are eight different port ranges that can be
configured (shared between source and destination ports). TCP and
UDP protocols each have eight port ranges.
Destination Port
Select the type of protocol for a match. Only available when protocol is
TCP or UDP.

Any: All source ports are acceptable.

Single: Enter a single TCP/UDP source port to which packets are
matched.

Range: Select a range of TCP/UDP source ports to which the packet
is matched. There are eight different port ranges that can be