3
II.
Installation
Read the following topics and perform the procedures in the correct order.
Incorrect installation may cause damage to the product.
II-1
Connecting to Network
1.
There are two ways to physically set up the switch.
˙
Place the switch on a flat surface.
˙
Wall-mount the switch. The product is designed with wall-mounted
holes. (The wall-mounted mounting screws and accessories are not
included.)
2.
Connect the power adapter to the switch and the power outlet.
(Note: Make sure that the "PWR" LED is green.)
3.
Plug the standard Cat5e Ethernet cable into the LAN port and connect it to
the computer and prepare for web-based configuration. (Note: Make sure
that the "LAN" LED is green or amber.)
4.
Connect any networking device to the switch via Ethernet cable. (Note:
Make sure that the "LAN" LED is green or amber.)
5.
Connect the router to the switch via Ethernet cable. (Note: Make sure that
the "LAN" LED is green or amber.) The hardware installation is complete!
1
２
３
４
5
1
Wall-Mount
Power On
Computer
Network Device
Router
