24
Parameter Description
Beacon Interval
Beacon Interval that specifies the duration between beacon
packets (milliseconds). The range for the beacon period is
between 20-1000 milliseconds with a typical value of 100.
DTIM Period
Determines the interval the Access Point will send its broadcast
traffic. Default value is 3 beacons.
Preamble Mode
The preamble defines the length of the CRC block for
communication among the wireless stations. There are three
mode including Long, Short and Auto. High network traffic areas
should use the shorter preamble type. If “Auto“ mode is selected,
the AP will auto switch the preamble mode depending on the
wireless cards.
Data Rate
There are several options including Auto/1/2/5.5/11Mbps for you
to select. When the “Auto” is selected, the AP will choose the most
suitable transmission rate automatically.
Accept Authentication Type
The wireless network supports two subtypes of network
authentication services: Open System and Shared Key. Under
Open System authentication, any wireless cards can request
authentication. Under Shared Key authentication, only wireless
cards using a shared key (WEP Key) are allowed to request
authentication. If “Both“ is selected, the AP can adjust the
authentication type automatically.
Set Defaults
Apply
Set the setting values return to defaults.
Confirm the settings in the “Advanced“.
