Edimax EU-4306, Быстрое руководство по установке

Страница: 5 / 18

5
IV. Linux
IV-1. Requirements
In order to build the driver, Linux kernel sources must be installed on the build
machine. The running kernel version must match the installed kernel sources;
kernel sources can be obtained from www.kernel.org or your Linux
distributor.
Note: Ensure that the kernel is built with Host-side, EHCI, OHCI or UHCI support.
IV-2. File Description
File Description
ax88179_178a.c AX88179_178A Main Linux driver
axix.h AX88179_178A Linux driver header
Makefile AX88179_178A driver make
IV-3. Conditional Complition Flags
IV-3-1.
Getting Started
1.
Extract the compressed driver source file to your template directory by the
following command:
[root@localhost template]# tar -xf DRIVER_SOURCE_PACKAGE.tar.bz2
2.
The driver source files should be extracted to the current directory.
Execute the following command to compile the driver:
[root@localhost template]# make
3.
If the compilation is successful, ax88179_178a.ko will be created under
the current directory.
4.
If you wish to use modprobe to mount the driver, execute the following
command to install the driver: