6. Specifications
•
Standards :
IEEE802.3 / 3u / 3x and 802.3af Power over Ethernet
•
Transmission :
10/100Mbps supports full or half duplex
•
Data Transfer Rate :
PPS (packets per second)
Speed
Forwarding Rate
100Mbps 148,800
PPS
10Mbps 14,880
PPS
•
MAC Address and Self-learning :
up to 1K
•
Buffer Memory :
96Kbyte on chip frame buffer
•
Flow Control :
IEEE802.3x compliant for full-duplex, Backpressure
flow control for half-duplex
•
Switching Method :
Store & forward
•
Network Interface :
8 10/100Mbps RJ-45 ports
•
UTP Cable :
10BASE-T: UTP Cat. 3, 4, 5 or up, 100BASE-TX: UTP
Cat. 5 or up
•
PSE Power Feeding Supports :
(Port 1 to 4)
“Endpoint” via TP pin 1, 2, 3, 6
•
Diagnostic LEDs :
System LED – Power
PoE LED – PoE Act (Port 1 to 4)
Per Port LED – Link / Act, 10/100Mbps
•
Power Requirement : AC Line
Voltage / Frequency 100-240V / 50-60Hz
Consumption
Max. 4W (in case no PD device
connected) or Max. 65W (with 4 x 15.4W
PoE devices connected)
•
Operation Temperature :
0
°
to 40
°
C
•
Operation Humidity :
10% to 90%
•
Storage Temperature :
0
°
to 55
°
C
•
Dimensions :
44(H)
×
220(W)
×
130.5(D) mm
•
Complies with FCC Part 15 Class A, CE Mark Approval
Note : To connect this device to a Router, Bridge or Switch, please refer
to the corresponding device's technical manual.
5