7
LED for each port:
The switch provides one “1000M” LED and one “10/100M” LED for each port.
1000M LED:
Shows the current transmitting/receiving speed of the port.
10/100M LED:
Shows the link status and the activities on the port.
LED
Status
Operation
Green
The port is connected at 1000 Mbps.
Blinking Green
A valid link is established, and there is data
transmitting/receiving.
1000M
Off
No valid link on this port or the port is connected
at 10/100 Mbps.
Steady Green
A valid link is established, and there is no data
transmitting/receiving.
Blinking Green
A valid link is established, and there is data
transmitting/receiving.
10/100M
Off
No valid link on this port or the port is connected
at 1000 Mbps.
Port Operation
The auto-negotiation feature allows those ports running at one of the
following operation modes:
Media
Speed
Duplex Mode
Full Duplex
10 Mbps
Half Duplex
Full Duplex
100 Mbps
Half Duplex
10/100/1000 Mbps(copper)
1000 Mbps
Full Duplex
1000 Mbps(Fiber)
(mini-GBIC required)
1000 Mbps
Full Duplex
Note:
For the last port, when both the fiber and cooper interfaces are
connected, the system adapts the fiber interface and disables the relevant
cooper port automatically.
Attention
：
：
：
：
The Mini GBIC slot shares the same LED indicator with the
last 4 RJ-45 (copper) ports.
All manuals and user guides at all-guides.com
