Edimax ES-1008PL, Быстрое руководство по установке

Страница: 7 / 13

6
1. PRODUCT INSTALLATION
There are two ways to install your switch, please select one that
suits you.
2. Desktop Installation
1. Install the switch on a level surface that can support the
weight of the unit and the relevant components, and attach
the rubber feet to the bottom. The rubber feet cushion the
switch and helps protect the case from scratches.
2. Plug the switch into an electrical source with the provided power
cord.
3. Rack-Mount Installation
Rack mounting allows for a more orderly installation
when a series of network devices is being installed.
1. Disconnect all the cables from the switch.
2. Place the unit the right way up on a hard, flat surface with the
front facing you.
3. Position a mounting bracket over the mounting holes on one
side of the unit.
4. Insert the screws and fully tighten with a suitable screwdriver.
5. Repeat the two previous steps for the other side of the unit.
6. Insert the unit into the rack and secure with suitable screws
7. Reconnect all the cables.
Regarding the installation environment, we strongly recommend:
1.
The switch should be placed in an appropriately ventilation
environment. A minimum 25 mm space around the unit is
recommended.
2. The switch and the relevant components should be kept away from
sources of electrical noise such as radios, transmitters and
broadband amplifiers.
3. Avoid environments with higher than recommended moisture levels.