5. Driver Installation
Insert the installation CD into your CDROM drive, the setup
programs will appear, select
“EN-9230TX-32”
then click on the
“Product Driver”
to install the driver, or you can click on the
“Browse CD”
to find other OS drivers on the CD.
6. Trouble-Shooting
If you experience any problems with the adapter, please make
sure the appropriate driver is loaded, the proper cable is
connected to the adapter port and the Hub/Switch complies with
the adapter specification, such as 10Mbps 10BaseT, 100Mbps
100BaseTX and 1000MbpsTX, then check the LED.
The adapter provides LED to indicate network status.
Link/Activity
The LED indicates if the UTP has been LINK ok or not. When the
light is
OFF
, it indicates that the UTP port has not been connected
or Link not ok, when the light is
ON
, it indicates that the UTP port
Link is ok, when the light is
BLINKING
; it indicates that there is
traffic flow on the network which the adapter is connected to.
