75
Add PC
Parameters
Description
Client PC Description
The description for this client PC rule.
Client PC IP Addresses
Enter the IP address range that you wish to apply this
Access Control rule. This is the user
’
s IP address(es)
that you wish to setup an Access Control rule.
Note:
You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
Client PC Service
You can block the clients from accessing some
Internet services by checking the services you want
to block.
Protocol
This allows you to select UDP, TCP or both
protocol type you want to block.
Port Range
It can be assign up to five port ranges. The router
will block clients from accessing Internet services
that use these ports.
Apply Changes
Click
“
Apply Changes
”
to save the setting.
Reset
Click
“
Reset
”
to clear all fields.
Click <
Apply Changes>
at the bottom of the screen to save the above configurations. You can
now configure other advance sections or start using the router (with the advance settings in place)
