Edimax AR-7287WnA, Руководство пользователя

Страница: 62 / 92

User Manual
The following table describes the parameters and buttons of this page.
Field Description
IP QoS Select to enable or disable IP QoS function. You need to enable IP QoS if
you want to configure the parameters of this page.
QoS
Policy You can choose stream based , 802.1p based or DSCP based .
Schedule
Mode You can choose strict prior or WFQ (4:3:2:1) .
Source IP The IP address of the source data packet.
Source
Mask
The subnet mask of the source IP address.
Destinati
on IP The IP address of the destination data packet.
Destinati
on Mask The subnet mask of the destination IP address.
Source
Port The port of the source data packet.
Destinati
on Port The port of the destination data packet.
Protocol The protocol responds to the IP QoS rules. You can choose TCP , UDP , ICMP
or TCP/UDP .
Physical
Port The LAN interface responds to the IP QoS rules.
Set
priority The priority of the IP QoS rules. P0 is the highest priority and P3 is the
lowest.
802.1p You can choose from 0 to 7.
delete Select a row in the QoS Rule list and click it to delete the row.
delete all Select all the rows in the QoS Rule list and click it to delete the rows.
4.2.4. CWMP
Choose Advanced > CWMP , the page shown in the following page appears. In this page,
you can configure the TR-069 CPE.