Edimax AR-7182WnA, Руководство пользователя

Страница: 47 / 92

47
Field Description
255. Enter the correct VPI provided by your ISP. By default,
VPI is set to
8 .
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
and 65535. Enter the correct VCI provided by your ISP. By
default, VCI is set to
35 .
Connection
Type You can select LLC or VC-Mux . In this example, the
encapsulation mode is set to PPPoE LLC .
After setting, click NEXT , the page as shown in the following figure appears.
Click
BACK to modify the settings.
Click NEXT to save the settings.
Click EXIT to cancel the settings.
Note :
After you saving the settings in the Quick Start page, you can view this
wan connection settings in the Interface Setup > Internet page.
5.4. Interface Setup
In the navigation bar, click Interface Setup . The Interface Setup page that is
displayed contains Internet , LAN and Wireless .
5.4.1. Internet
Choose Interface Setup > Internet . The Internet page that is displayed
contains ATM VC , Qos , IPv4/IPv6 and Encapsulation .
Click Internet pane, the page shown in the following figure appears. In this
page, you can configure the WAN interface of your router.