Edimax AR-7167WnA, Руководство пользователя

Страница: 45 / 98

37

IP Common Options
Parameter Description
Encapsulation Please check with your ISP the method of multiplexing.
In Static IP Mode, please select
“1483 Bridge IP LLC” or
“1483 Bridge IP VC-Mux” or “1483 Routed IP LLC(IPoA)”
or
“1483 Routed IP VC-Mux”.
Bridge Interface This router has built-in ADSL modem and is able to
connect to ISP directly. Alternatively, if you want to use
the dial up software to manually connect to the ISP, you
have to activate the
”Bridge Interface”.
Default Route When
“Default Router” is enabled, all the packets for
destinations not known by the router's routing table are
sent to the default route. By default, it is enabled.
TCP MTU Option MTU (Maximum Transmission Unit) determine the
maximum size of each packet in any transmission within
the network. Please specify the MTU range from 100 to
1500 bytes or 0 byte as the default value.

IPv4 Options
Parameter Description
Static IP Address Enter the IP Address assigned by your ISP.
IP Subnet Mask Enter the Subnet Mask assigned by your ISP.
Gateway Enter the Gateway assigned by your ISP.
NAT NAT (Network Address Translation), an Internet standard
that enables a local-area network (LAN) to use one set of
IP addresses for internal traffic and a second set of
addresses for external traffic. When NAT is enabled, the
router will help to make all necessary IP address
translations for the PC connected to the router to access