EdilKamin VYDA AIR TIGHT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 40

25
ENGLISH
USER CONTROLS (REMOTE CONTROL)
- ON/OFF
- Switch-on/switch-off
- Manual mode setting
• Power setting
• Fan setting
- Automatic mode setting
• Temperature setpoint setting
• Fan setting
- RELAX function
- From the Menu screen:
• Pellet Load
(shown only when the product is OFF)
• Stand By
• Crono
• Night
(shown only when the product is ON)
• Date / time
• Display
• Language
• Beep
• Info
(technician only)
• Technical Menu (technician only)
We describe the procedures below.
ON/OFF
hold the ON/OFF button down to turn the product ON.
When ON, the product has a flame (ignition phase,
etc.) when there is a heating demand.
Switch-on/switch-off
The ON/OFF button switches the product on (starts
the ignition phase) or off (starts the switch off phase)
manually
in Manual mode only.
In Automatic mode, the product responds to the
heating demand.
Setting Manual/Automatic
Press the OK button for two seconds to switch from
manual to automatic or vice versa.
In Manual mode, the display reads “Man”.
In Automatic mode, the temperature displays.
In automatic:
Set Room Temperature (read by the remote control,
this should be positioned in the room the product is
installed in).
Set the temperature setpoint (Set) with the “+” and “-”
buttons.
In manual:
Power setting
Set the power level (displayed by the flame symbol)
with the “+” and “-” buttons.
The power level displays next to the flame symbol.
Ventilation setting
Follow the instructions below to manually regulate the
power levels of the fan.
Press “OK” once.
The fan setting displays, next to the blade symbol
representing the fan.
Set the fan level with the “+” and “-” buttons.
The blades fill in to indicate the current setting.
Confirm by pressing the OK button for two seconds.
The fan setting can also follow the room temperature
demand (reduce when the temperature is close to the
desired temperature or increase vice versa)
To activate this mode, press the + button to above the
maximum fan setting. The letter “A” will appear next to
the blade symbol.
THE NUMBER NEXT TO THE FAN BLADE OR FLAME
ONLY DISPLAYS WHILE THE SETTING IS BEING
MADE.
USER INSTRUCTIONS
USER