EdilKamin CHERIE UP, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 56

42
ENGLISH
USER CONTROLS (REMOTE CONTROL)
- ON/OFF
- Switch-on/switch-off
- Manual mode setting
• Setting the power
• Setting the fan
- Automatic mode setting
• Setting the required temperature
• Setting the fan
- RELAX function
- From the Menu page:
• Pellet Load
(shown only when the product is OFF)
• Stand By
• Crono
• Night
(shown only when the product is ON)
• Date / time
• Display
• Language
• Beep
• Info
(technician only)
• Technical menu (technician only)
We describe the procedures below.
ON/OFF
hold the ON/OFF button down to turn the product ON.
When ON, the product has a flame (ignition phase,
etc.) when there is a heating demand.
Switch-on/switch-off
The ON/OFF button switches the product on (starts
the ignition phase) or off (starts the switch off phase)
manually
in Manual mode only.
In Automatic mode, the product responds to the
heating demand.
Setting Manual/Automatic
Press the OK button for 2 seconds to switch from
manual to automatic or vice versa.
In Manual mode, the display reads “Man”.
In Automatic mode, the temperature displays.
In automatic:
Setting the Room Temperature
(read by the
remote control, which should be in the room where the
product is installed)
Set the temperature setpoint (Set) with the “+” and “-”
buttons.
In manual:
Setting the Power
Set the power level (displayed by the flame symbol)
with the “+” and “-” buttons.
The power level displays next to the flame symbol.
USER INSTRUCTIONS
USER
Switching on and off will take a few minutes,
during which the flame must appear or go
off. Just wait without taking any action.
During ignition, the display shows the text
“ON”.
During switch-off, the display shows the text
“OFF”.