EdilKamin BLADE H 18, Инструкция по установке, эксплуатации и обслуживанию, Страница: 8 / 52

8
ENGLISH
KIRA H - VyDA H UnPAcKInG
PRePARAtIon AnD UnPAcKInG
The packaging materials are neither toxic nor noxious
and do not require special disposal.
The user is responsible for storing, disposing of and
recycling them in a regulatory fashion.
Always move the stove in an upright
position with suitable equipment and in
observance of safety regulations.
Do not turn the package over, and handle
all parts requiring installation with care.
PAcKAGInG (further information in the paragraph
on linings)
The delivery consists of two packages:
• one
(1) with the structure of the boiler stove
• one (2) with the ceramic or stone cladding
In the boiler stove package you will find:
• warranty certificate,
• glove,
• this manual,
• power cable,
• small parts for installing the lining * (further details
on the following page),
• grille of the top,
• protective lever (removable handle) for opening
the combustion chamber door.
InstALLeR
On the top of the boiler stove there are the components described above
1
2
The metal grille of the top is contained in package
(1) with the boiler stove, provided with the small parts
for its installation (three M4 screws for the ceramic
parts and M6 for the stone parts, washers and rubber
buffers to be applied on top of the grille)
* Other small parts (for Vyda H and Kira H)
• M4 screws with washers for fixing the ceramic
parts
• M5 screws with washers for the ceramic sides of
Kira H
• M6 screws for fixing the stone parts
• cable glands for the terminal board on the rear
protective lever
grille of the top
tHe exHAUst PIPe to be connecteD
to tHe fUMe MotoR Is LocAteD In tHe
pELLET TANK.