EDIFIER W855BT, Руководство по эксплуатации

Страница: 6 / 27

NFC connection
1. Turn on the headphone and switch on the NFC function on your device.
2. Put your device to near the headphone. The Bluetooth connection will be made
automatically by NFC. Your device is now connected to the headphone.
3. Play the music on your device and adjust the volume to a desired level.
Note:
1. When the phone is in standby mode or lock the screen, you can’t use
NFC to connect the headphone.
2. When in the first time pairing, you need to make the phone touch the
headphone for longer time, take
away the phone until the
headphone into pairing mode.
3. When device disconnects the
headphone, you can use the NFC
function to connect the device.
When have connected device,
you can also use NFC function to
disconnect the device.
Pairing and connecting with multiple devices
The headphone can connect with two Bluetooth devices at the same time.
The operation is as below.
1. Firstly make the headphone pair with the first device.
2. Re-start the headphone. Enter the pairing mode and pair with the second
device.
3. Select connecting with the headphone from the first device. The
headphone has already connected with the first and second device; or
automatically connect the two devices after the headphone re-start.
Note:
● Disable pairing one headphone with two devices: When the headphone
connects with no device, press MFB button and volume decrease button
for about 2 seconds, you will hear an indicator tone.
● Enable paring one headphone with two devices: When the headphone
stands by and connects with no device, press MFB button and volume
increase button for about 2 seconds at the same time, you will hear an
indicator tone.
● If you only need to connect with one phone, we suggest you to disable
pairing one headphone with two devices in order to improve the
headphone’s performance.
4