1. Press INPUT to select Bluetooth input. The logo will blink.
2. Set you device (mobile phone, table device, MP3 player etc.,) to search and select “EDIFIER
Tick Tock BT”. When the connection is made, the logo will stop blinking and a signal indicator
will also appear.
3. Play your audio device.
1. Press INPUT to select the Bluetooth input. The logo on the screen will blink.
2. Turn on your Bluetooth settings on your computer to be discoverable and enabled.
3. If your computer does not have Bluetooth built-in, connect your external Bluetooth adaptor and follow the device set up procedures.
4. Within your computer Bluetooth settings, add and search for new devices. The device name for the Tick Tock is “EDIFIER TickTock BT”.
5. Select the “EDIFIER TickTock BT” device to pair/connect with. Once complete, the Bluetooth logo on the screen will be stop
blinking and a signal indicator will also appear.
6. Within your computer sound preferences, select the external speaker device/ “EDIFIER TickTock BT” as your sound output/audio
source.
1. Press INPUT to select AUX input.
2. Press to adjust volume.
1. Mute the system: press .
2. Press and hold FUNC to display the system version.
3. Press the to reset the entire system.
Note:
The sequence of the three steps above will reset and erase all settings and restore the unit to the original factory
default settings.
Note:
is not available.
Note: 1. are available only for the source devices support AVRCA (Audio/Video Remote Control Profile).
2. When connecting to a Bluetooth Source device (e.g. mobile phone), make sure the source device supports A2DP
(Advanced Audio Distribution Profile).
3. PIN code for connection is “0000” if needed.
For specific details about Bluetooth setup and connectivity, please refer to the user manual for your computer.
Operational guide
Operational guide
1. Press FUNC until “SECH” appears on the screen.
2. Press : auto search & store presets
1. Press & hold FUNC until “LOC.” appears on the screen.
2. Press to select your FM region.
1. Press FUNC until “TUNE” appears on the screen.
2. Press to tune the FM frequency in increments of 0.1MHz.
FM turner controls
Selecting FM region
General guideline for portable devices
General guideline for computer connection
Reset the system
Auto search & store presets
Manual FM tuner
Bluetooth
7
English
6
English
