background image

Treble unit:                              Φ19mm silk dome tweeter, magnetically shielded, 4Ω 
System dimension:                  140 mm

×

413 mm

×

189 mm (W x H x D) 

Net weight:                              Approx. 4.3kg     
Gross weight:                          Approx. 5.3kg     

 

 

 

Page 11

 

Troubleshooting

 

 

Not all speakers function:

 

Please first check if the speaker wires are connected securely; 
then check if the line-in connectors are reversed; check also if the audio source is at fault. 
 
● 

One satellite speaker does not function when playing CD from computer:                       

This kind of phenomena is prone to happen on new computer systems that one satellite does not function when playing CD, but 
system works fine when playing WAV formatted files.

 

This is mainly due to a faulty connection of CD-ROM and sound card, that one channel of signal is shorted to the ground. 
Please refer to the manual of CD-ROM and sound card to adjust the wire connection. 

 

 

After  speaker automatically reconnects to the last connected USB Bluetooth soundcard, no  music output from 

speaker system:

 

Since some of the USB Bluetooth soundcard driver will not automatically enable SBC codec, please press and hold the FUNC 
button to disconnect with the soundcard, then set up the connection again from PC. 

 

 

System does not work at all

 

1. Please check if power is connected, and if the wall outlet is switched on. 
2. Please check if the amplifier is still in STBY mode. 
3. Please check if the master volume is turned to minimum. 
4. Please check if the audio input cable is connected correctly. 
5. Please check if there is signal from audio source. 
 

 Noise coming from speakers

 

Amplifier circuitry of this product generates little noise, while the background noise of some VCD/DVD players or 
computers sound card may be too high. 
Please keep the system in active mode and remove the audio source, if no sound can be heard at 1 meter away 
from the system, then there is no problem with this product. 
 

 Magnetic interference 

This system is completely magnetically shielded, and can be placed near TV or monitor. But since magnet of the subwoofer 
driver is large, some magnetism leakage is inevitable when the system is too close to the monitor, and it is recommended to 
keep a 1 meter distance between the speaker system and monitor or TV set. 
 

 If you have any further questions or concerns regarding Edifier Products Please visit our website at: www.edifier.com, or 

email Edifier Support for further assistance at: [email protected], If you prefer, you may contact us by phone, Toll Free: 
1-877-EDIFIER (334-3437). 
 

Содержание Spinnaker e30








Отзывы: