Trouble Shooting Guide:
Noise coming from speakers:
Amplifier circuitry of this product generates little noise, while the background noise of some VCD/DVD player
or computer sound card are too high
.
Please keep the system in active mode and remove the audio source,
if no sound can be heard at 1 meter away from the system, then there is no problem with this product
.
The lightning flash with arrowhead
inside the triangle, is intended to
alert the user to the presence of
un-insulated dangerous voltage
within the product's enclosure that
may be of a sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point inside the
triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
To prevent the risk of electric shock,
do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service
personnel only.
This indicates the appliance
is a Class 2 Power Unit
For indoor use only
SAFETY INSTRUCTIONS:
Please read all the instructions herein.
Please retain this manual safely for future reference.
Please heed all safety warnings.
Please install in accordance with the manufacturer's instructions.
Please adjust the volume control to a comfortable level to avoid damaging
your hearing and the system.
Do not expose this apparatus to rain or moisture.
Do not use the speakers near water, and do not immerse them in any liquid or pour
any liquid on them.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
For added protection during lightning storms, unplug the speakers from the electrical outlet
and turn off the computer.
Unplug this apparatus when unused for long periods of time.
Place the speakers away from all heat sources, such as heaters, stoves, and direct sunlight.
Do not block the openings in the speaker cabinets. Never push objects into speaker vents
or slots. Prevent risk of fire or electric shock hazards, and provide sufficient space around
the speakers for proper ventilation.
Place the speakers in a stable location so that it will not fall causing damage to the
speakers or bodily harm.
Unplug the speakers from the computer and from the electrical outlet before cleaning
them with a damp cloth.
Servicing is required when the apparatus has been damaged in any way, such as the
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped. Refer all servicing to qualified service personnel only.
Use the plug or the coupler inlet to disconnect with mains.
Magnetic interference:
This system is complete magnetically shielded, and can be placed near TV or monitor. But since magnet of the
subwoofer driver is large, some magnetism leakage is inevitable when the system is too close to the monitor,
and it is recommended to keep a 1 meter distance between the speaker system and monitor or TV set.
Not all speakers function:
Please check firstly if the speaker wires are connected securely; then check if the audio connecting cables are
reversed, check also if the audio source is at fault.
Not all speakers function:
Please check firstly if the speaker wires are connected securely; then check if the audio connecting cables are
reversed, check also if the audio source is at fault.
System does not work at all:
1. Please check if power is connected, and if the wall outlet is switched on.
2. Please check if the amplifier is still in STBY mode.
3. Please check if the master volume is turned to minimum.
4. Please check if the audio input cable is connected correctly.
5. Please check if there is signal from audio source.
No sound when using digital input:
The Edifier S2000 system has a built-in digital decoder, and recognizes PCM signals.
Please set the DVD digital
output format of your audio source to 32KHz~48KHz PCM stereo,
system won't work correctly when playing from
AC-3 or DTS formatted signal.
Edifier S2000 has two analog inputs: CD&AUX, with different sensitivities and impedances. Be sure to match
the same format to achieve the best of the system.
