English
No sound from any of the speakers
1. Please ensure AC adapter is plugged in and power outlet is switched on.
2. Please ensure speaker audio cable connections are correct.
3. Please ensure sound source equipment is working correctly.
Please ensure all speaker cable connections are correct. Please try an alternate sound
source such as a CD player, MP3 or other player. If both speakers now work correctly,
the original sound source is at fault.
Sound from only one speaker
please visit our website at: www.edifier.com ,
or email Edifier Support for further assistance at: [email protected]
If you prefer, you may contact us by phone Toll Free: 1-877-EDIFIER (334-3437).
This tends to occur due to the fact the USB output cannot supply sufficient power for the
speaker system. Please adjust your volume to the correct level accordingly.
If you have any further questions or concerns regarding Edifier Products
Speaker has distortion when volume set on Max whilst using computer USB
as a power supply.
When playing CD from computer, only one speaker has sound
Speakers exhibit excessive noise
Mostly this phenomenon tends to occur with a new computer - only one satellite works
when playing an audio CD, but all work correctly when running a WAV file or playing a
Game. The reason for this is the CD-ROM is not matched with the Soundcard, or one
signal channel maybe shorted to a ground wire. Also please refer to the CD-ROM user
manual to adjust the jumpers.
Edifier speakers are of a very low noise circuit design. Some source equipment may
have a poor signal to noise ratio. Therefore, please unplug the input audio cable, and
check if the noise is from the CD/DVD player or the Computer Soundcard etc.
Troubleshooting Guide
